 
Version	Description				   
V1.0	
		Initial Beta release, functional			   
						   
V1.0.1	
		Added DRO error checks 			   
		Auto turn on tip correct after calibration		   
						   
V1.0.2	
		File close error fixed			   
		Perimeter routine stops off of part		   
						   
						   
V1.1.0	
		Cleanup screenset layout			   
		Fixed all routines to work with CSMIO (CSMIO returns x=0, y=0, z=0 on probing miss, while paraport and SmootStepper return actual location data)	   
		Added counter feedbackto the perimeter probing screen	   
		Corrected diameter mode bore measurement for a backoff error	   
		Added second calibration mode (Option 2 - manually center spindle)	   
		Added probeActive checks in perimeter routine for safety
	   
						   
V1.1.1	
		Correction to 'post' routine and depth value	   
		Allow negative probe tip correction values in calibration table (for option 2 routine)	 


V1.1.2
 
		Record Z postions in DXF, basic and perimeter routines	   
		Warn of 'zero mode on' when recording	 , turn off DXF temporarily  
		Updated Calibration Option 2 (find center and set x/y offset)	   
		Add offsets to all probing functions	   
		Update setZ (hit code, change ZDRO set to center of ball)	   
		update touchz (change surface to bottom of ball)	   
		Added Z up/down buttons for manual control	   
		Constrain slope change on perimimeter routine added	   
		Added rapid FRO control 	   
		Fix tip correct lookup error (negative angles)	   
		Fixed perimeter DXF write of interpolated Corners	   
		Altered calibration routines to discard prior data.
		General screenset cleanup
		Manual updated and improved


V1.1.3 
 
		Added auto corner find/G68 rotation 	
		Added 'menu' page, and TAB flyout menu page.
		fix 'version' reading to c: specific
		add Mach3 revision check/warning
		made recorded file open/appending relative to Mach path (not hard to C:\),                    		works with non-standard Mach3 installs now.
		added 20ms delay in license checking
	.	Added 'gcode' run page, so user can script their own probe routines-info on how to do it coming.
	.	Cleaned up screenset/resized to better fit 1024x768 monitors
	.	Added X/Z probing routing page (prelim version)


V1.1.4
	.	Fix clearance moves in post routine
	.	Add check for 'hit' and mis tolerance in post routine
	.	Fix issue with negative z surface for post and ridge routines
	.	Added info for how to do Gcode calls to probing in manual, and example files


1.1.5 preliminary
	.	Added auto move to x0y0 for corner routine (with auto zero on and auto up on)
	.	Altered 'surface' routine, tried to fix for CSMIO issue
	.	Fix the zeroing on vertical and horiz. 'slot-outer' and 'slot-inner' routine.
	.	Altered some DRO labels to correct use of same DROs as 2010 screenset





